OrALert Oral Fluid Test Procedure
PACKAGE CONTENTS
STEP ONE
Instruct the donor to not place anything in the mouth including food, drink, gum or tobacco products for at least 10 minutes prior to collection.
STEP TWO
Remove the collector from the sealed pouch and insert the sponge end of collector into mouth; actively swab the inside of the mouth and tongue with sponge. As soon as the sponge softens slightly, the donor should gently press the sponge between the tongue and teeth to ensure complete saturation; the sponge is saturated when no hard spots can be detected. Collect for a total of 3 minutes before removing sponge. The donor should hand the saturated collector to the tester.
STEP THREE
Insert collector into device as shown; push collector down into chamber; turn collector clockwise to lock into chamber; wait 1 minute.
STEP FOUR
Rotate collection chamber 90° counterclockwise.
STEP FIVE
Wait 9 minutes and read results.
STEP SIX
If results are positive, remove collector from device and secure reservoir with tamper evident tape; secure cap onto collection chamber; send device to laboratory for confirmation. Laboratory can access reservoir through stopper.
BACK TO ORALERT PRODUCT PAGE